182 Part Number 80-1230-9 10/10
SN012/SN020 Only
SELECTOR SWITCH
FUNCTION
Selects product dispensed. Ice, Water or Ice and
Water.
CHECK
1. Inspect the selector switch for correct wiring.
2. Isolate the switch by disconnecting all wires from
the switch.
3. Check resistance across the switch terminals with
an ohm meter.
Replace the selector switch if ohm readings do not
match all three switch settings.
Switch Setting Terminals
Resistance
Reading
ICE
L1 - A Closed
L1 - B Open
L1 - L3 Open
L1 - C Open
L3 - C Open
WATER
L1 - A Open
L1 - B Closed
L1 - L3 Open
L1 - C Open
L3 - C Open
WATER AND ICE
L1 - A Open
L1 - B Closed
L1 - L3 Open
L1 - C Open
L3 - C Closed
To Next Page
Loading...
Need help?
General
