17
16
5.7 MANAGER MODE - LANGUAGE TAB
MANAGER MODE FUNCTION & DEFAULTS DESCRIPTIONS MODIFIED
Language Select default language. This option allows the user to select a flag for a
specific language.
Sets the language for the
console. Select between
English, Spanish, German,
French, Italian, Portuguese,
Finnish, Japanese, Swedish,
Dutch, Welsh, Turkish or
Polish.
CHAPTER 5: MANAGER MODE
FUNCTION & DEFAULTS DESCRIPTIONS MODIFIED
Asset Management
Default: Off
This option allows fitness clubs to collect workout
data to a PC.
On or Off
Virtual Active
Default: Off
This option controls the Virtual Active function.
note: Virtual Active only works in AC Plug In
Mode.
On or Off
E-Stop Default: On This option controls the E-Stop function. On or Off.
ENGINEERING MODE
Other
5.8 MANAGER MODE - OTHER TAB
6.1 ENGINEERING MODE OVERVIEW
The Engineering Mode allows the club owner to keep track of the technical settings and error history for the Climb Mill.
1) To enter Engineering Mode, press ENTER, 2, 0, 0, 1, ENTER on the lower keypad. Engineering Mode will appear on the display (Figure A).
2) Follow the prompts to change the desired setting.
3) Press the ENTER key once the desired setting is correct to save.
4) Press HOME to return to normal operation. note: If a setting has been changed, the unit and console power should be reset. Cycle the
power switch, and press and hold the CHANNEL UP and CHANNEL DOWN keys for 3-5 seconds to reset the console power.
FIGURE A
CHAPTER 6: ENGINEERING MODE
To Next Page
Loading...
Need help?
General
