13
12
5.2 MANAGER MODE - ABOUT TAB
FUNCTION & DEFAULTS DESCRIPTIONS MODIFIED
Serial Number This option displays the serial number of the
platform and console. See Service Mode to
edit the serial numbers.
Cannot be modified.
Accumulated Distance Total distance on the unit since production. Cannot be modified.
Accumulated Time Total time on the unit since production. Cannot be modified.
Software Versions Software version. Cannot be modified.
Out of Order
Default: Off
This option allows the club to show the unit
"out of order" if an error is present.
On / Off
CSafe Model This option controls whether the console is
Fitlinxx compatible.
LMM / MMM / LAM
MANAGER MODE
About
CHAPTER 5: MANAGER MODE
5.3 MANAGER MODE - TIME TAB
FUNCTION & DEFAULTS DESCRIPTIONS MODIFIED
Maximum Time
Default: 60 Minutes
This option allows the club to set the maximum
workout duration limits during peak and non peak
hours.
Maximum: 99 Minutes
Minimum: 5 Minutes
Default Time Default: 30 Minutes This option controls the default program time. Maxi: Max Time Min: 5 Minutes
Pause Time Default: 5 Minutes This option controls the default pause time. Max: 10 Min Min: 1 Minute
MANAGER MODE
Time
CHAPTER 5: MANAGER MODE
5.4 MANAGER MODE - CLIMB MILL TAB
FUNCTION & DEFAULTS DESCRIPTIONS MODIFIED
Adjust Resistance Offset
Default: 0
This option allows the engineer to set the
resistance offset of SPM adjustment.
Maximum: -10 Min: 10
Default Demand Floor Default: 20 This option controls the default floor. Maximum: 200 Min: 15
Default Target Calories Default: 100 This option controls the default calories. Maximum: 5000 Min: 150
MANAGER MODE
Climb Mill
C7xe-03-C - If the unit has the LMM board, the CSafe
Model should be set for LMM.
C7xe-04-C - If the unit has the LA console (the
console cover back will have holes for ventilation), the
CSafe Model should be set for LAM.
C7xe-01-C or C7xe-02-C - If the unit has the old MMM
board, the CSafe Model should be set for MMM (even
if the MMM console is replaced).
To Next Page
Loading...
Need help?
General
