113
Controls in detail
Locking and unlocking
왘 Press and hold buttons Œ and ‹
simultaneously for about 5 seconds un-
til battery check lamp 5 (
컄 page 110)
flashes twice.
The SmartKey will then function as fol-
lows:
Unlocking driver’s door and fuel filler
flap
왘 Press button Œ once.
앫 All turn signal lamps flash once.
앫 An acoustic signal sounds once.
앫 The locking knob on the driver’s
door move up.
앫 The anti-theft alarm system is dis-
armed.
Global unlocking
왘 Press button Œ twice.
앫 All turn signal lamps flash once.
앫 An acoustic signal sounds once.
앫 The locking knobs in the doors
move up.
앫 The anti-theft alarm system is dis-
armed.
Global locking
왘 Press button ‹.
With the trunk and all doors closed:
앫 All turn signal lamps flash three
times.
앫 An acoustic signal sounds three
times.
앫 The locking knobs in the doors
move down.
앫 The anti-theft alarm system is
armed.
Restoring to factory setting
왘 Press and hold buttons Œ and ‹
simultaneously for about 5 seconds un-
til battery check lamp 5 (
컄 page 110)
flashes twice.
SmartKey with KEYLESS-GO*
Vehicles equipped with KEYLESS-GO come
with two SmartKeys with KEYLESS-GO,
each with remote control and a removable
mechanical key.
The locking tabs for the mechanical key
portion of the two SmartKeys with
KEYLESS-GO are a different color to help
distinguish each SmartKey with
KEYLESS-GO unit.
The KEYLESS-GO function is integrated
into the SmartKey. On these vehicles, the
validity of the SmartKey with KEYLESS-GO
is checked every time you pull an outside
door handle.
If the SmartKey with KEYLESS-GO is valid,
your vehicle unlocks
앫 the doors
앫 the trunk
앫 the fuel filler flap
To Next Page
Loading...
Need help?
General
