434
Practical hints
Where will I find ...?
Vehicle tool kit
The vehicle tool kit is stored in the com-
partment underneath the trunk floor
(
컄 page 432).
The vehicle tool kit includes:
앫 One pair of universal pliers
앫 One towing eye bolt
앫 One wheel wrench
앫 One alignment bolt
앫 One fuse extractor
앫 Spare fuses
앫 Collapsible wheel chock
앫 A pair of gloves
Setting up the collapsible wheel chock
The collapsible wheel chock serves to
additionally secure the vehicle, e.g. while
changing the wheel.
1 Tilt the plates upward
2 Fold the lower plate outward
3 Insert the plate
왘 Tilt both plates upward 1.
왘 Fold the lower plate outward 2.
왘 Guide the tabs of the lower plate all the
way into the openings of the base
plate 3.
Vehicle jack
Warning! G
The jack is designed exclusively for jacking
up the vehicle at the jack take-up brackets
built into both sides of the vehicle. To help
avoid personal injury, use the jack only to lift
the vehicle during a wheel change. Never
get beneath the vehicle while it is supported
by the jack. Keep hands and feet away from
the area under the lifted vehicle. Always
firmly set parking brake and block wheels
before raising vehicle with jack.
Do not disengage parking brake while the
vehicle is raised. Be certain that the jack is
always vertical (plumb line) when in use,
especially on hills. Always try to use the jack
on level surface. Make sure the jack arm is
fully seated in the jack take-up bracket.
Always lower the vehicle onto sufficient
capacity jackstands before working under
the vehicle.
To Next Page
Loading...
Need help?
General
