451
Practical hints
Replacing wiper blades
Vehicles with KEYLESS-GO*
왘 Turn off the engine (컄 page 64).
With the driver’s door closed, the start-
er switch is now in position 1.
왘 Turn combination switch to wiper
setting U (
컄 page 58).
왘 With wiper arms in the vertical position,
open the driver’s door.
The starter switch is set to position 0,
same as SmartKey removed from start-
er switch.
왘 Turn combination switch to wiper
setting 0 (
컄 page 58).
Removing wiper blades
왘 Fold the wiper arm forward until it
snaps into place.
왘 Turn the wiper blade at a right angle to
wiper arm.
왘 Slide the wiper blade sideways out of
the retainer.
Installing wiper blades
왘 Slide the wiper blade onto wiper arm
until it locks in place.
왘 Rotate the wiper blade into position
parallel to the wiper arm.
왘 Fold the wiper arm backward to rest on
the windshield. Make sure you hold on
to the wiper when folding the wiper arm
back.
!
Do not pull on the wiper blade inserts. They
could tear.
To Next Page
Loading...
Need help?
General
