468
Practical hints
Towing the vehicle
Installing towing eye bolt
Front of vehicle
1 Cover on right side of front bumper
To remove cover:
왘 Press mark on cover 1 in direction of
arrow.
왘 Lift cover 1 off to reveal the threaded
hole for towing eye bolt.
The towing eye bolt is supplied with the
tool kit (located in the storage compart-
ment under the trunk floor).
왘 Screw towing eye bolt in to its stop and
tighten with lug wrench.
To reinstall cover:
왘 Fit cover 1 and snap into place.
Rear of vehicle
2 Cover on right side of rear bumper
To remove cover:
왘 Pull cover 2 in direction of arrow.
왘 Fold cover 2 down to reveal the
threaded hole for the towing eye bolt.
The towing eye bolt is supplied with the
tool kit (located in the storage compart-
ment under the trunk floor).
왘 Screw towing eye bolt in to its stop and
tighten with lug wrench.
To reinstall cover:
왘 Fit cover 2 and snap into place.
To Next Page
Loading...
Need help?
General
