135
Controls in detail
Memory function
M Memory button
1, 2, 3 Memory position button
왘 Switch on the ignition (컄 page 37).
or
왘 Open the respective door.
Storing positions into memory
왘 Adjust the seats, steering wheel and
exterior rear view mirrors to the de-
sired position (
컄 page 41).
왘 Press memory button M.
왘 Release memory button M and press
memory position button 1, 2 or 3 with-
in 3 seconds.
All the settings are stored to the select-
ed position.
Recalling positions from memory
왘 Press and hold memory position
button 1, 2 or 3 until the seat, steering
wheel and exterior rear view mirrors
have completely moved to the stored
positions.
!
Do not operate the power seats using the
memory button if the seat backrest is in an ex-
cessively reclined position. Doing so could cause
damage to front or rear seats.
First move seat backrest to an upright position.
i
Releasing the memory position button stops
movement to the stored positions immediately.
The multicontour seat* will continue to be ad-
justed.
To Next Page
Loading...
Need help?
General
