245
Controls in detail
Panorama roof with power tilt/sliding panel*
왔 Panorama roof with power tilt/sliding panel*
Opening and closing the roller
sunblinds for the panorama roof with
power tilt/sliding panel
The tilt/sliding panel and the front and
rear roller sunblinds are opened and
closed electrically. The switch for the
tilt/sliding panel and the roller sunblinds is
on the overhead control panel. An addi-
tional switch for the roller sunblinds is in
the rear passenger compartment.
The roller sunblinds only operate with the
tilt/sliding panel closed. The front and rear
roller sunblind cannot be operated individ-
ually.
Roof panel switch
1 Open roller sunblinds
2 Close roller sunblinds
Roller sunblinds switch, rear
1 Open roller sunblinds
2 Close roller sunblinds
왘 Switch on the ignition (컄 page 37).
Opening and closing the roller sun-
blinds
왘 To open or close the roller sunblinds,
move the roof panel/roller sunblinds
switch to the resistance point in the re-
quired direction of arrow 1 or 2.
Release the roof panel/roller sunblinds
switch when the roller sunblinds have
reached the desired position.
컄컄
To Next Page
Loading...
Need help?
General
