136
Controls in detail
Memory function
Storing exterior rear view mirror park-
ing position
For easier parking, you can adjust the pas-
senger-side exterior rear view mirror so
that you can see the right rear wheel as
soon as you engage reverse gear R.
For information on activating the parking
position, see “Activating exterior rear view
mirror parking position” (
컄 page 200).
1 Driver’s side exterior rear view mirror
button
2 Passenger side exterior rear view mir-
ror button
3 Adjustment button
4 Memory button M
왘 Stop the vehicle.
왘 Switch on the ignition (컄 page 37).
왘 Press button 2.
The passenger-side exterior rear view
mirror is selected.
왘 Adjust the exterior rear view mirror
with adjustment button 3 so that you
see the rear wheel and the road curb.
왘 Press memory button M 4.
왘 Within 3 seconds, press bottom of ad-
justment button 3.
The parking position is stored if the
mirror does not move.
i
If the mirror does move, repeat the above
steps. After the setting is stored, you can move
the mirror again.
To Next Page
Loading...
Need help?
General
