This function pertains to the Inst. cluster
(instrument cluster) menu, the Lighting menu
and the Vehicle
menu.
Using the steering wheel buttons
X
Press the V or U button repeatedly
until the Settings
menu appears in the dis-
play.
X
Press the 9 button to switch to the sub-
menu selection.
X
Press the W or X button to select the
Convenience
submenu.
X
Press the 9 button to select the Key func-
tion.
The selection marker is on the current setting.
X
Press the W or X button to activate or
deactivate key dependency.
Trip computer menu
General notes
You can call up or reset statistical data for the
vehicle in the Trip computer menu.
i
When you call up the trip computer again, it
displays the last function called up.
The units of the statistical information dis-
played are set permanently for each specific
country, and are therefore independent of the
units selected in the Settings
menu.
Trip computer "After start" or "After
reset"
Example: "After start" trip computer
:
Distance
;
Time
=
Average speed
?
Average fuel consumption
Using the steering wheel buttons
X
Press the V or U button to select
After start
.
or
X
Press the 9 or : button to select
After reset
.
The values in the After
start submenu refer to
the start of the journey. The values in the After
reset submenu refer to the last reset of the trip
computer.
The After start
trip computer function is
automatically reset if:
R
the ignition has been switched off for more
than 4 hours.
R
999 hours have been exceeded.
R
9,999 miles have been exceeded.
The After
reset trip computer is automatically
reset if the value exceeds 9,999 hours or
99,999 miles.
i
If you turn the key to position 0 in the igni-
tion lock or remove it, all the values are reset
after approximately four hours.
The values will not be reset if you turn the key
back to position 1 or 2 during this time.
Calling up the range
Using the steering wheel buttons
X
Press the V or U button to select
After start
.
X
Press the 9 or : button to select
Range
.
The approximate distance which can be cov-
ered with the tank's current contents and
your current style of driving is shown.
i
If there is only a small amount of fuel left in
the fuel tank, the 7 Please refuel
mes-
sage is shown instead of the range.
Resetting the trip computer
Using the steering wheel buttons
X
Press the V or U button to select
After start
.
X
Press the 9 or : button to select the
function you would like to reset.
X
Press and hold the 9 reset button until the
values are reset to "0".
174
On-board computer (vehicles with steering wheel buttons)
On-board computer and displays
To Next Page
Loading...
Need help?
General
