Vehicles with bi-xenon headlamps
:
Turn-signal: NAK 3457
;
Cornering light function: H7 55W
Vehicles with additional turn signals in the
exterior mirrors
Additional turn signal lamp: HPC 16WY
Low-beam headlamps and high-beam
headlamps/cornering lamp
Example (halogen headlamps)
X
Switch off the lighting system.
X
Open the hood (Y page 218).
X
Turn housing cover : in the direction of the
arrow and remove it.
Example (halogen headlamps)
;
Low-beam headlamp bulb holder
=
Bulb holder for high-beam headlamp
?
Bulb holder for parking lamp/standing lamp
(halogen headlamps)
X
Turn the corresponding bulb holder with
bulb ;, = or ? counter-clockwise and pull
it out of the lamp.
X
Pull the bulb out of the bulb holder.
X
Insert the new bulb in such a way that its base
fits into the recess of the bulb holder.
X
Insert the bulb holder with the bulb into the
lamp and turn it clockwise to tighten.
The bulb holder engages audibly.
X
Place housing cover : into the opening and
turn in the opposite direction of the arrow.
X
Close the hood.
Cornering light function/daytime run-
ning lamps
X
Switch off the lighting system.
X
Open the hood (Y page 218).
X
Turn housing cover : counter-clockwise and
remove.
Changing bulbs
87
Lights and windshield wipers
Z
To Next Page
Loading...
Need help?
General
