Towing
Towing
117
Guidelines for Breakdown Services (Subject to technical modifications)
i
왘 Tie the axle up to the frame with chains. Place a
wooden block between the frame and the chain.
왘 Attach lifting device.
왘 Secure the vehicle to the lifting device with
straps.
Raising the vehicle at the rear crossmember (semitrailer tractors only)
왘 If necessary, detach the trailer hitch or towing
coupling.
왘 Unfasten the wiring harness in the crossmember
and the compressed air reservoir if necessary
and push to one side.
!
Observe the tire pressure and changes in the tire temperature. The front axle load increases when multi-axle
vehicles are raised at the last axle.
!
Raising the vehicle by the end of the frame can lead to frame damage, so only raise by the wheels or the axle
housings.
To Next Page
Loading...
Need help?
General
