Tilting the cab
Description and roadside assistance
93
Guidelines for Breakdown Services (Subject to technical modifications)
i
Mechanical/hydraulic cab tilt system
Always tilt the cab all the way forward as far as the end stop.
If the tilting hydraulics are defective or leaking, contact a qualified specialist workshop possessing the required
expertise and tools for the necessary work.
Mercedes-Benz recommends a Mercedes-Benz service center for this work.
It is absolutely essential that all safety-relevant work and all work on safety-relevant systems is performed by a
qualified specialist workshop.
Tilting the cab forward
The tilt pump is located behind the cab on the right-
hand side.
왘 Move valve lever on tilt pump to "Tilt forward"
position
1.
왘 Attach pump lever to tilt pump with nut wrench
(in vehicle tool kit).
왘 Operate tilt pump until the cab is tilted all the way
forward to the end position.
The cab is unlocked automatically when the tilt
pump is operated.
If no resistance can be felt when operating the tilt
pump:
왘 Check that there is sufficient oil in the tilt pump.
If firm resistance can be felt when operating the tilt
pump:
왘 Check that the valve lever 1 on the tilt pump is
pointing in the desired direction.
To Next Page
Loading...
Need help?
General
