Transmission
Description and roadside assistance
75
Guidelines for Breakdown Services (Subject to technical modifications)
i
Teach-in process
In vehicles with Telligent
®
automatic gearshift system, the minor or major teach-in process is necessary in order
to program vehicle-specific data in the electronic system of the transmission control (GS), e.g. if the clutch has
been replaced or a fault has occurred.
If a fault is displayed:
왘 Stop the vehicle.
왘 Apply parking brake.
왘 Switch off engine.
왘 Perform minor or major teach-in process.
Notes on the teach-in process
The display of the engaged gear remains off for the entire duration of the teach-in process.
If a teach-in process is aborted, an event message is shown in the display.
왘 Turn the vehicle key in the steering lock all the way back and wait at least 5 seconds.
왘 The displays in the gear indicator disappear.
왘 Repeat teach-in process.
Minor teach-in process
The minor teach-in process is necessary when sensors on the transmission or on the clutch, or the clutch itself,
have been replaced.
왘 Press and hold down neutral button.
왘 Turn vehicle key in steering lock to drive position.
The gear indicator displays the transmission neutral position
N
.
왘 Release neutral button.
The teach-in process is complete.
i
The teach-in process cannot be performed in vehicles with automatic transmission.
i
Teach-in or operating errors are indicated by a fault code in the display, see page 77.
i
If the fault display reappears in the electronic system of the transmission control (GS) after the minor teach-
in process, perform the major teach-in process.
To Next Page
Loading...
Need help?
General
