Oil level in engine
Description and roadside assistance
49
Guidelines for Breakdown Services (Subject to technical modifications)
i
Topping up engine oil
The filler neck for the engine oil is at the front of the vehicle behind the maintenance flap.
If the oil level in the engine is too low or too high, the
status indicator lights up yellow and the display
shows
N and the necessary top-up quantity, or
O.
If a correct engine oil level reading is not possible,
the display shows
P and a message.
왘 Open maintenance flap.
왘 Unscrew and remove cap 1 on oil filler neck.
왘 Top up engine oil.
왘 Fit cap 1 on oil filler neck and screw tight, check for tight seating and check for leaks.
왘 Close maintenance flap.
i
Add the displayed top-up quantity only when the display N appears. Add the full recommended quantity.
!
Only use approved engine oils of the specified SAE grades.
If too much engine oil is added, drain off or extract the excess.
To Next Page
Loading...
Need help?
General
