Heilbronner Straße 30 — 74363 Güglingen
declar
e that the product "Weber hydraulic bottle
jack", types:
A AD ADX AH AHX AL AT ATD ATDX ATG ATN
ATGX ATPX ATQ AX
Capacity: 2,000 to 100,000 kg
Serial no.: from year of manufacture 01/2010
complies with the relevant essential health and
safety requirements of the EC Machinery Direc-
tive.
This EC declaration of conformity becomes inva-
lid:
R
in the event of modications or repairs per-
formed by an unqualied person
R
if the products are not used correctly and in
accordance with the Owner's Manual
R
if the required regular checks are not per-
formed.
Relevant EU Directives: EC Machinery Directive
2006/42/EC
Applicable standards: ISO 11530
Quality assurance: DIN EN ISO 9001:2000
Güglingen, 1 July 2013
[Signature] [Signature]
Manager Representative of
T
echnical
WEBER-HYDRAULIK
GMBH
Documentation
WEBER-HYDRAULIK GMBH
Heilbronner Strasse 30 — 74363 Güglingen
Diagnostics connection
The diagnos
tics connection is a technical inter-
face in the vehicle. It is used, for example, during
repair and maintenance work or for reading out
vehicle data in a specialist workshop. Diagnostic
devices should therefore only be connected in a
qualied specialist workshop.
&
WARNING Risk of accident due t
o con-
necting devices to the diagnostics con-
nection
If you connect devices to the diagnostics con-
nection of the vehicle, the function of vehicle
systems and operating safety may be
impaired.
#
For safety reasons, we recommend that
y
ou only use and connect products
approved by a Mercedes-Benz service
centre.
&
WARNING Risk of accident due t
o objects
in the driver's footwell
Objects in the driver's footwell may impede
pedal travel or block a depressed pedal.
This jeopardises the operating and road safety
of the vehicle.
#
Stow all objects in the vehicle securely
so t
hat they cannot get into the driver's
footwell.
26
General notes
To Next Page
Loading...
Need help?
General
