Mercury 200 SportJet User Manual

MAINTENANCE
54
a - Lift pump
b - Lift pump circuit ‑ 5 amp fuse
Corrosion Control Anodes
NOTICE
Anodes made of insufficiently pure aluminum alloys may not
adequately protect critical drive components from corrosion. We
recommend using anodes sold through Mercury Precision Parts
only.
Anodes help protect the power package against galvanic corrosion
by sacrificing its metal to be slowly eroded instead of other metals.
This model has three corrosion control anodes: One on the bottom
of the nozzle, one on the reverse gate, and one under the rudder.
Anodes help protect the Mercury Jet Drive against galvanic
corrosion by sacrificing its metal to be slowly eroded instead of the
Mercury Jet Drive metals.
a - Anodes
b
a
44761
aaa
5467

Mercury 200 SportJet Specifications

General

Model	200
Horsepower	200
Kilowatts	149.1
Full throttle RPM range	5150–5650
Idle speed RPM range	900–1000
Number of cylinders	6
Piston displacement	2508 cc (153 in³)
Cylinder bore	88.4 mm (3.500 in.)
Stroke	67.3 mm (2.650 in.)
Spark plug	NGK IZFR6J‑11
Spark plug gap	1.1 mm (.043 in.)
Recommended gasoline	Refer to Fuel and Oil
Recommended oil	Refer to Fuel and Oil
Emission control system	Electronic engine control (EC)
Battery rating (minimum)	1000 marine cranking amps (MCA) or 800 cold cranking amps (CCA)
Charging system output	60 A