Mercury SC 1000 User Manual

System Tachometer Display Screens
When the ignition is turned on, the tachometer will display the last screen that
was visible before the ignition was turned off.
Press "MODE/SELECT" to change display screens. Revert back to the
previous screen by pressing and holding "MODE/SELECT" for two seconds.
NOTE: Readings can be displayed in English (U.S.) or metric. Refer to
Tachometer Screens .
NOTE: Depending on the engine model and vessel options, not all screens will
apply.
F
125
1
2
3
4
5
6
7
OIL
PSI
12.5
150
HOT
F
OIL
COLD
50349
TRIM WATER PSI
12.51.5
TRIM RPM
22051.5
12.5
H20
PSI
VOLTS HOURS
12.2
1.5
1.
Temperature: Displays the engine coolant temperature.
2.
Oil Temperature: Displays the engine oil temperature.
3.
Oil Pressure: Displays the engine oil pressure in "PSI" or "BAR."
4.
Trim and RPM: Displays the engine RPM and trim position.
5.
Power Trim Angle: Displays the trim angle of the outboard or sterndrive
up to the maximum trim angle and then displays the trailer angle. 0 =
down, 10 = maximum trim, and 25 = full trailer.
6.
Water Pressure: Displays the cooling system water pressure at the
engine.
SC 1000 TACHOMETER
eng 11

Mercury SC 1000 Specifications

General

Brand	Mercury
Model	SC 1000
Category	Measuring Instruments
Language	English