Mercury SC 1000 User Manual

CANCELING LAUNCH CONTROL
The launch control will turn off when the cruise control is turned off.
Creating a Customized Launch Setting
Beyond launch setting number 5 are eight customized launch settings. Each
customized launch setting name can have up to seven alpha characters to
identify the custom launch. The custom launch setting can be controlled by
RPM or speed. To use the speed setting control, GPS must be interfaced with
the SmartCraft gauge through a junction box.
NOTE: If the Smart Tow set point is changed while the customized launch is
active, the set point will automatically be saved for that user .
1. Press the "SELECT" button to highlight "SET LAUNCH."
2. Advance the launch control setting beyond number 5. After number 5 the
"NEW USER" launch control setting will activate.
3. Press and hold the "SELECT" button for approximately three seconds to
edit the customized launch setting.
a - Raise launch control
setting
b - Lower launch control
setting
c - Set cruise RPM
d - "SELECT" button
e - Launch control setting
Customized Launch Settings
AAAAAAA
RPM SET
NAME
MPH SET
1000
10.0
[DOWN]
[EDIT]
30595
Press the "SELECT" button to edit the name.
0
SPEED
10
20
30
40
50
60
70
80
SMART
TOW ON
35.5
+ / - TO DISENGAGE
b
a
d
c
RPM
SET LAUNCH
e
USER
NEW
53437
SMART TOW
42 eng

Mercury SC 1000 Specifications

General

Brand	Mercury
Model	SC 1000
Category	Measuring Instruments
Language	English