To Next PageTo Next PageTo Previous PageTo Previous Page
Need help?Do you have a question about the Mercury SC 1000 and is the answer not in the manual?
General| Brand | Mercury |
|---|---|
| Model | SC 1000 |
| Category | Measuring Instruments |
| Language | English |
Explains gauge power up, lighting, buttons, Engine Guardian, and warning systems.
Details engine name, software version, and OBD icon for emissions control.
Describes how descriptive text alarm warning screens are displayed for engines from 2007 onwards.
Explains the "SYS FAULT" screen, fault location, and fault description displays.
Describes fault screens for emission control, showing an engine icon and "OBD SERVICE SOON".
Explains universal fault codes available on specific products manufactured from 2015 onwards.
Explains how to return the gauge to factory defaults, resetting installation settings.
Lists problems and their display status on Tachometer and Speedometer displays.
Lists various screens available for Tachometer and Speedometer displays.
Explains how the tachometer displays the last screen and how to change screens.
Explains how the system estimates run time since last maintenance and the 100-hour cycle.
Explains how the Sport Exhaust feature allows changing the sound of the outboard idle relief exhaust volume.
Details how to access the menu and change settings like speed control, troll control, and lighting.
Explains how to turn system display screens on and off by selecting "YES" or "NO".
Details how to calibrate fuel tank capacity and other settings.
Explains how the speedometer displays the last screen and how to change screens.
Details how to access the menu and change settings like speed control, light, contrast, and splash screen.
Explains how to turn system display screens on and off.
Details how to set time, format, UTC zone, and calibrate external sensors.
Explains how to set and control troll speed using the tachometer or speedometer.
Details how to engage troll control, set desired speed, and handle "TOO FAST" or "TOO SLOW" conditions.
Lists three methods to cancel troll control: using the MODE/SELECT button, moving the throttle, or shifting to neutral.
Explains Cruise Control availability, modes (RPM/Speed), and engagement/disengagement.
Explains how to turn the cruise control system ON/OFF.
Details how to set cruise control RPM, including engaging and noting requirements for both gauges.
Provides step-by-step instructions for engaging cruise control, including speed increments.
Explains how to cancel cruise control and that it remembers the set speed.
Explains Launch Control availability and how it determines engine acceleration to a set cruise speed.
Details setting launch control modes (RPM/Speed) and adjusting launch settings from 1 to 5.
Explains how to create customized launch settings beyond standard profiles, including naming and editing.
States that additional hardware may be required for Active Trim features.
Introduces Active Trim as a GPS-based automatic trim system for performance and fuel economy.
Explains the four modes of operation for the Active Trim system.
Explains that Active Trim uses GPS for vessel speed and requires a signal to control trim.
States Active Trim cannot detect water depth and requires manual override in shallow water.
Explains that trailer position prevents Active Trim engagement and requires manual trim down.
Details how to turn Active Trim on/off and adjust trim profiles for different conditions.
Shows how to select an active trim minor profile and save the selection.
Provides configuration notes and procedures for setting up Active Trim, including turning ignition and remote trim.
Explains selecting an Active Trim major profile and adjusting it based on boat behavior like porpoising.
