Basic Operation and Features
NOTE: Descriptive text alarm warning screens are displayed with 2007 and
newer engines. Universal fault codes can be utilized with specific Outboard and
MerCruiser products produced 2015 and newer.
System Tachometer System Speedometer
Power up: Each gauge will power up when the ignition is turned on. The
gauges will stay on as long as the ignition is on.
Lights: Adjusts the brightness and contrast of the gauge.
Buttons: The "MODE/SELECT" button is used for selecting information
screens. The "+" and "–" buttons are used for setting engine speed for troll
control, and setting gauge calibrations.
Troll control: Sets and controls the idle speed of the engine for trolling without
using the throttle.
Engine Guardian System: Monitors the critical sensors on the engine for any
early indication of problems. The system will respond to a problem by reducing
engine speed and alerting the operator to a potentially damaging situation.
Warning system: The system sounds the warning horn and displays the
warning with descriptive text or a fault code.
IMPORTANT: Optional sensors such as depth, fuel, paddle wheel, and steering
angle, should always be connected to the starboard engine when using
SmartCraft gauges version 4.0 or later.
PRODUCT OVERVIEW
eng 1
To Next Page
Loading...
Need help?
General
