Mercury SC 1000 User Manual

TURNING THE SYSTEM ON/OFF
a - Increase set cruise RPM
b - Decrease set cruise RPM
c - Set cruise RPM
d - Cruise control off
SETTING CRUISE CONTROL
To set the cruise control RPM:
1. Press either the "+" or "–" button to bring up the cruise control display
screen.
2. Set desired cruise RPM. When the throttle is in the wide‑open throttle
position, the set RPM will be the maximum speed.
3. press "+" and "–" button simultaneously to engage the cruise control.
NOTE: The cruise control must be engaged for both gauges to display the
active cruise control setting.
CANCELING CRUISE CONTROL
To cancel the cruise control: press the "+" and "–" buttons simultaneously.
Precise Speed Control Calibration (Optional)
The Smart Tow with a GPS source is capable of maintaining the speed within
0.8 km/h (0.5 MPH) of the cruise control setting. It is not mandatory to complete
this tutoring exercise for the speed control to function, it will calibrate itself
during normal operation.
0
SPEED
10
20
30
40
50
60
70
80
b
a
SMART
TOW ON
1000
CRUISE
LAUNCH
+ / - TO DISENGAGE
RPM SET
c
SMART
TOW OFF
1000
CRUISE
LAUNCH
+ / - TO DISENGAGE
RPM SET
d
53434
SMART TOW
38 eng

Mercury SC 1000 Specifications

General

Brand	Mercury
Model	SC 1000
Category	Measuring Instruments
Language	English