Mercury SC 1000 User Manual

NOTE: Depending on the engine model and vessel options, not all screens will
apply.
0
SPEED
10
20
30
40
50
60
70
80
300
FUEL USED
1.5
ESTIMATED RANGE
MILES
TRIP
25
MILES
42.3
MPH
STEERING ANGLE
52 PORT
6
7
8
9
10
RESET
PITOT
RESET
GAL
46452
COG MPH
- - - - - -
TO WAYPOINT
- - -
- - -
GAL
MI
DIST
11
12
6.
Estimated Range: The estimated range is based on boat speed, fuel
consumption, and fuel remaining in the tank. The numbers displayed are
an estimate of the distance you can travel with the remaining fuel. Speed
input required (paddle wheel, pitot pressure, or GPS).
7.
Trip: Displays the distance traveled since the gauge was last reset to
zero. Reset: To reset, select the display screen and press "MODE/
SELECT" and "–" simultaneously.
8.
Speedometer: Displays the boat speed in miles per hour, kilometers per
hour, or nautical miles per hour. The speedometer will use the paddle
wheel for its low‑speed readings and will switch to the pitot or GPS (if
connected) for high‑speed readings.
9.
Fuel Used: Displays the amount of fuel used since the gauge was last
reset to zero. Reset: To reset the fuel used screen, press "MODE/
SELECT" and "–" simultaneously.
10.
Course Over Ground: Displays the direction of travel and current speed
through a GPS.
11.
To Waypoint: Displays the amount of fuel to the waypoint and the
distance to the waypoint. A GPS unit with waypoints capability must be
installed to display the distance to the waypoint.
SC 1000 SPEEDOMETER
eng 27

Mercury SC 1000 Specifications

General

Brand	Mercury
Model	SC 1000
Category	Measuring Instruments
Language	English