CALIBRATION
[ SKIP ] [EDIT ]
MENU
TIME
52693
Sets the time. Select "EDIT" to format the time
or "SKIP" to advance to the next screen.
(DOWN) (SAVE) ( UP )
23535
CALIBRATION
TIME FORMAT
12H - M, D, Y
Formats the time as either 12 hour
month‑day‑year or as 24 hour day‑month‑year.
Select "DOWN" or "UP" to change the format.
( NO )
( SKIP ) ( YES )
46461
CALIBRATION
USE GPS TIME
DISABLED
When a GPS is installed and the GPS is
enabled, the speedometer will display time
received by the GPS. This is useful to
automatically update the time when crossing
time zones.
[DOWN]
[SAVE] [ UP ]
CALIBRATION
UTC ZONE
UTC CORRECTION = 0 H
30197
When the GPS time is enabled, the UTC zone
can be changed from –13 H to 13 H. Press "–"
to select "DOWN," or "+" to select "UP."
(DOWN) (SAVE) ( UP )
23536
CALIBRATION HOUR
1:42
PM
Adjusts the hours to match your local time.
Select "DOWN" or "UP" to change the hour
setting.
(DOWN)
(SAVE) ( UP )
23538
CALIBRATION MINUTE
1:42
PM
Adjusts the minutes to match your local time.
Select "DOWN" or "UP" to change the minute
setting.
(SKIP) (EDIT)
CALIBRATION
EXTERNAL SENSORS
52681
Selects and calibrates external sensors that
are installed in the system. Select "SKIP" to
proceed to the next selection. Select "EDIT" to
proceed to external sensor selection.
(SAVE) ( YES )
CALIBRATION
EXTERNAL SENSORS
( NO )
AIRTEMP ?
YES
52682
Is an air temperature sensor installed? Press
"–" to select "NO" or "+" to select "YES."
(SAVE) ( YES )
CALIBRATION
EXTERNAL SENSORS
( NO )
GPS ?
YES
52683
Is a GPS sensor installed? Press "–" to select
"NO" or "+" to select "YES."
SC 1000 SPEEDOMETER
32 eng
To Next Page
Loading...
Need help?
General
