Standard Controller MCAC-TSM-2008-02
88 Controller
6) View and Reset compressor/pump time
Example display and reset time (hours x10) for Pump 2
Press the set key from the main display
The label Ai will appear on the display. Use the UP
and DOWN keys to scroll the other labels until you find
the Hr label.
Press the set key to view the first label - which in this case
is the running time for compressor 1 (CP01)
Scroll with the UP and DOWN keys to view (if the relative
resources are present) the running time for compressor 2
(CP02) the pump running time (PU01, PU02)/Press the
set key to view the pump running time PU02.
To Next Page
Loading...
Need help?
General
