Miele H 2890 B User Manual

Installation
*
I
N
S
T
A
L
L
A
T
I
O
N
*
72
Electrical connection
 Danger of injury!
Installation, repairs and other work
by unqualified persons could be
dangerous. Miele cannot be held
liable for unauthorised work.
Connection to the electrical supply
must be carried out by a suitably
qualified and competent person in
accordance with local and national
safety regulations. Ensure power is
not supplied to the appliance until
after installation or repair work has
been carried out.
All electrical work should be carried out
by a suitably qualified and competent
Miele approved service technician in
strict accordance with current national
and local safety regulations (BS 7671 in
the UK).
Connection should be made via a fused
connection unit or a suitable isolator,
which complies with national and local
safety regulations, and the on/off switch
should be easily accessible after the
appliance has been installed.
If the switch is not accessible after
installation (depending on country) an
additional means of disconnection must
be provided for all poles.
Switches with a minimum all-pole
contact gap of 3mm are suitable for
isolating the appliance. These include
circuit breakers, fuses and protective
devices.
Connection data
The required connection data are given
on the data plate located on the oven
trim visible when the door is open.
Ensure that these match the mains
supply.
 When contacting Miele, please quote
the following:
– Model number
– Serial number
– Connection data (voltage/frequency/
maximum connected load)
When replacing the cable supplied
with another cable or changing the
connection, only cable type H05VV-F
with a suitable cross-sectional area
(CSA) may be used.
Oven
This oven is supplied with an approx.
2m long 3-core cable for connection to
a single-phase supply.
Maximum connected load: see data
plate.
When replacing the cable supplied
with another cable or changing the
connection, only cable type H 05 VV-
F with a suitable cross-sectional area
(CSA) may be used.

Miele H 2890 B Specifications

General

Fast heat	Yes
Oven size	Large
Oven type	Electric
Self-cleaning	-
Number of ovens	1
Total oven power	- W
Oven thermostat range	50 - 270 °C
Number of shelf positions	3
Total oven(s) interior capacity	90 L
Current	16 A
Connected load	3700 W
AC input voltage	220–240 V
AC input frequency	50 Hz
Energy efficiency scale	A+++ to D
Energy consumption (conventional)	1.45 kWh
Energy consumption (forced convection)	0.89 kWh
Door hinge	down
Cord length	1.7 m
Control type	Rotary
Product color	Black, Stainless steel
Control position	Front
Appliance placement	Built-in
Clock type	Electronic
Timer modes	Cooking time, End cooking time, Timer
Lamp type	Halogen
Lamps quantity	2 lamp(s)

Weight and Dimensions

Depth	568 mm
Width	895 mm
Height	478 mm
Weight	64000 g
Installation compartment depth	550 mm
Installation compartment height	517 mm
Installation compartment width (min)	860 mm