Clock/timer
46
Altering settings
Your appliance is supplied with a
number of standard default settings
(see the "Settings overview" chart).
A setting is changed by altering its
status .
Turn the function selector to 0.
Press and hold until appears.
If you want to change another setting,
press or repeatedly until the
relevant number appears.
Confirm with OK.
The setting is selected and the current
status appears, e.g..
To alter the status:
Press or repeatedly until the
required status appears in the
display.
Confirm with OK.
The selected status is saved and the
setting appears again.
If you wish to alter more settings,
proceed as described previously.
If you do not want to alter any more
settings:
Wait for approx. 15 seconds until the
time of day appears.
The settings remain in memory even
after a power cut.
To Next Page
Loading...
Need help?
General
