Cleaning and care
84
Dismantling the door
The oven door is an open system with
4glass panes which have a heat-
reflective coating on some of their
surface.
When the oven is operating, air is
directed through the door to keep the
outer pane cool.
If soiling has worked its way in between
the glass panes, the door can be
dismantled in order to clean in between
the panes.
Take particular care as scratches can
damage the glass. When cleaning
the glass panes do not use abrasive
cleaning agents, hard sponges or
brushes and do not use sharp metal
tools or scrapers.
Please also read the general notes
on cleaning the oven front before
cleaning the glass panes.
The glass panes are coated in
different ways with a heat-reflective
coating on the sides facing into the
oven cavity. The glass panes must
be fitted the right way round after
being cleaned.
Oven spray will damage the
aluminium trims inside the door.
These should only be cleaned using
hot water and washing-up liquid
applied with a clean sponge or a
clean, damp microfibre cloth.
Be especially vigilant after
dismantling the door that the glass
panes do not break.
To Next Page
Loading...
Need help?
General
