Miele H6800BMX User Manual

Settings
45
Sensor lock
The sensor lock prevents a cooking
process being switched off or changed
while it is running. Once activated, the
sensors and fields in the display are
locked a few seconds after a
programme has started.
– On
The sensor lock is active. You must
touch the symbol for at least
6seconds to use the sensors again.
The sensor lock is then deactivated
for a short period.
– Off
The sensor lock is not active. All
sensors react to touch as normal.
Showroom programme
This function enables the oven to be
demonstrated in showrooms without
heating up. It should not be set for
domestic use.
Demo mode
If you switch the oven on whilst it is in
Demo mode, the following message
will appear in the display: Demo mode
is switched on. The appliance will not heat
up.
– On
Touch OK for at least 4seconds to
activate Demo mode.
– Off
Touch OK for at least 4seconds to
deactivate Demo mode. The oven
can then be used as normal.
Factory default settings
– Settings
Any settings that you have altered will
be reset to the factory default setting.
– User programmes
All User programmes will be deleted.
– MW power levels
Power levels which have been
changed will be reset to the factory
default settings.
– Recommended temperatures
Recommended temperatures which
have been changed will be reset to
the factory default settings.
– MyMiele
All MyMiele entries will be deleted.

Miele H6800BMX Specifications

General

Brand	Miele
Model	H6800BMX
Category	Oven
Language	English