Miele Inspira G 1180 Technical Information

Technical Information
165
G 1xxx/G 2xxx
Model Access Procedure Available Options
G 118x/G 2170/G 218x
(See Section 4.2.1 for option
descriptions.)
1. Press and hold Program button.
2. Switch on appliance and wait
approx. 4 sec. for “Rinse & Hold”
LED to light up.
3. Release Program button.
Water hardness
Rinse aid
Buzzer on/off
Reset standard settings
G 1202
(See Section 4.2.2 for option
descriptions.)
1. Press and hold Program and
Start/Stop buttons.
2. Switch on appliance and wait
approx. 4 sec. for "Start/Stop" LED
to light up.
3. Release Program and Start/Stop
buttons.
Water hardness
Rinse aid
Adjust Sensor Wash
Reset standard settings
G 1262
(See Section 4.2.3 for option
descriptions.)
1. Press and hold Program button.
2. Switch on appliance and wait
approx. 4 sec. for “Rinse & Hold”
LED to light up.
3. Release Program button.
Rinse aid
Buzzer on/off
Reset standard settings
G 147x/G 247x
(See Sections 4.2.4 and 4.2.5
for option descriptions.)
1. Press and hold Program button.
2. Switch on appliance and wait
approx. 4 sec. for "Rinse & Hold"
LED to light up.
3. Release Program button.
Check and set water
hardness (up to ID -1080);
activate/ deactivate
softener sensor, set water
hardness (after ID -1080)
Rinse aid
Buzzer on/off
Adjust Sensor Wash
program (after ID -984)
Check water hardness
(after ID -1080)
Reset standard settings
G 2020
(See Section 4.2.6 for option
descriptions.)
1. Turn the control dial to the 12
o’clock position.
2. Press and hold Start/Stop button.
3. Switch on appliance and wait
approx. 4 sec. for "Start/Stop" LED
to light up.
4. Release Start/Stop button.
Water hardness (3 o’clock)
Rinse aid (5 o’clock)
Resetting standard
settings (11 o’clock)
G 2142/G 2143/G 2120/
G 2140/G 2150
(See Sections 4.2.7 and 4.2.8
for option descriptions.)
1. Press and hold Start/Stop button.
2. Switch on appliance and wait
approx. 4 sec. for "Start/Stop" LED
to light up.
3. Release Start/Stop button.
Water hardness
Rinse aid
Reset standard settings
G 2420/G 243x
(See Section 4.2.9 for option
descriptions.)
1. Press and hold Start/Stop button.
2. Switch on appliance and wait
approx. 4 sec. for "Start/Stop" LED
to light up.
3. Release Start/Stop button.
Check and set water
hardness (up to ID -1080);
activate/ deactivate
softener sensor, set water
hardness (after ID -1080)
Rinse aid
Adjust Sensor Wash
program (after ID -984)
Check water hardness
(after ID -1080)
Reset standard settings
Table 080-4: Customer Programming Summary

Miele Inspira G 1180 Specifications

General

Brand	Miele
Model	Inspira G 1180
Category	Dishwasher
Language	English