4. Selecting programme settings
31
Selecting extra options
The drying programmes can be aug-
mented with various extra options.
Touch the sensor control.
If the or symbol appears, this
means that only one extra can be se-
lected. The message Active also ap-
pears after the sensor control has
been touched.
Gentle tumble
Anti-crease
Extras
Touch the sensor control for the extra
you want.
The symbol for the selected extra lights
up under the symbol.
Not all extras can be selected with
every programme, only those pro-
grammes for which it makes sense.
Gentle tumble
Sensitive items are dried with less
mechanical movement (fewer drum ro-
tations).
Anti-crease
After the programme has finished, the
drum will continue to rotate in a certain
rhythm, depending on the selected pro-
gramme. This helps to prevent creasing
after the programme has ended.
The anti-crease function is switched off
as the factory default setting. It can be
switched on in the supervisor level with
a variable duration of up to 12 hours.
To Next Page
Loading...
Need help?
General
