Supervisor level
82
Opening Supervisor level
The settings menu in the Supervisor
level is locked against unauthorised
access. The menu can be unlocked
with a code.
Access via code
The supervisor level is accessed using
a code.
Factory default: the code is 000.
Change code
You can alter the supervisor level ac-
cess code to protect the tumble dryer
from unauthorised access.
Carefully enter a new code.
Please inform Miele Service if you
have forgotten your new code. Miele
Service will have to reset the code.
Make a note of your new code and
store it in a safe place.
Opening the supervisor level
Touch the sensor control.
The symbol appears in the display
if you turn the programme selector to
aprogramme.
Supervisor
level
Change code
Access via code
Select Access via code.
Enter the individual numbers and
confirm each selection with OK.
The supervisor level settings are
opened.
Supervisor
level
Language
Brightness
Select the setting you want.
Exiting the supervisor level
Touch the sensor control or
switch off the tumble dryer.
To Next Page
Loading...
Need help?
General
