5. Starting the programme
33
Payment systems
Tip: If your machine is connected to a
payment system, the amount of pay-
ment required will appear in the display.
Once the programme has started, do
not open the door or cancel the pro-
gramme.
Depending on the settings, money
may be lost in the payment system.
Starting the programme
The programme can be started as soon
as the Start/Stopsensor control is
flashing on and off.
Touch the Start/Stopsensor control.
The drying programme starts. The Start/
Stop sensor control lights up.
If a start delay has already been selec-
ted, this starts to count down before the
drying programme starts automatically.
Drying and the time left for the drying
programme are displayed.
The drying level reached is displayed if
a drying level programme is running.
Tip: Touching the sensor control al-
lows you to display the options selec-
ted.
Programme duration/Estim-
ated time remaining
The programme duration depends on
the quantity of laundry, the type of fab-
ric and the residual moisture in the
laundry or also the water hardness. The
running time for drying level pro-
grammes can therefore vary or “jump”.
The tumble dryer's electronic control
system adapts to these factors and
then adjusts the displayed programme
duration with increasing accuracy.
To Next Page
Loading...
Need help?
General
