6. End of programme – unloading the drum
34
End of programme
The laundry will be cooled down shortly
before the end of the programme. The
laundry can now be unloaded.
The programme has ended when only
Finish is left on the display.
If Anti-crease * has been selected,
the drum rotates in intervals. This re-
duces creasing if the laundry cannot be
removed straight away.
* The anti-crease function is switched
off as the factory default setting.
The tumble dryer will switch off auto-
matically 15 minutes after the end of a
programme.
Unloading the drum
Open the door.
Remove everything from the drum.
Items left in the tumble dryer could
be damaged by overdrying when the
tumble dryer is used the next time.
Always remove all items from the
drum.
Switch the tumble dryer off.
Observe any maintenance
notes
This tumble dryer requires regular
maintenance, particularly if it is used
on a continuous basis.
Tip: Please see “Cleaning and care” for
details. Read the “Cleaning the appli-
ance at the correct intervals” section
first.
To Next Page
Loading...
Need help?
General
