Miele PDR 507 HP Marine User Manual

Installation
*INSTALLATION*
78
Hose for external drainage of
condensed water
The condensed water is pumped away
through the drain hose which is loc-
ated at the back of the dryer.
Laying the drain hose
 Damage to the drain hose due to
incorrect handling.
The drain hose can suffer damage
and leak.
Do not pull on the drain hose and do
not stretch it or allow it to become
kinked.
Tip: Use the bow-shaped guide to pre-
vent the drain hose from becoming
kinked.
Drain hose length: 1400mm
Delivery head: 1000mm
 Pull the drain hose out of the clips.
Drainage options
Tip: Follow the warnings regarding leak-
ing or returning water if you select one
of the following connection options.
– Directed into a sink or basin
– Directed into a floor gully
– Connected directly to a sink drain
outlet
– Connection to a drainage system
already in use by another appliance,
e.g. a dishwasher or washing ma-
chine
 Water damage.
Should the end of the hose come
loose, overflowing water can cause
damage.
Secure the drain hose carefully (e.g.
by tying it) to make sure it cannot
slip.
 Damage caused by condensa-
tion back-flow.
Water could flow back into the
tumble dryer or be drawn into it. The
tumble dryer will sustain damage
and water will leak out.
The non-return valve should be used
if the end of the hose is immersed in
water, or if other water connections
are installed.

Miele PDR 507 HP Marine Specifications

General

Brand	Miele
Model	PDR 507 HP Marine
Category	Dryer
Language	English