Operation
53
Interrupting a programme
A programme will be interrupted as
soon as the door is opened.
When the door is closed again, the
query Select Start to continue appears in
the display.
The programme will continue from the
point at which it was interrupted when
you press the Start button.
Risk of scalding due to hot
water.
During operation, water in the
dishwasher may be very hot.
During operation, only open the door
with extreme caution.
Cancelling or changing a
programme
If a programme is cancelled,
important programme stages may be
missed.
A programme should only be
cancelled in the first few minutes of
the programme sequence.
If a programme has already started and
you wish to cancel it, proceed as
follows:
Switch the dishwasher off using the
sensor control.
Confirm the query Switch appliance off
with OK.
If you would like to select another
programme:
Switch the dishwasher back on using
the sensor control.
If you have dispensed detergent
manually, check whether the
detergent compartment is still closed.
If the lid is already open, fill it with
detergent again and close the lid.
Select the programme you want and
start it., and then start it.
To Next Page
Loading...
Need help?
General
