Miele PFD 101 User Manual

Guide to the appliance
8
Display functions
The display is used to select or set the
following:
- The programme
- The timer
- The Settings 
The display can show the following:
- The programme stage
- The estimated time left for the
programme to run
- The current temperature of the
programme step
- The water consumption
- Any relevant fault messages and
information
To save energy, the dishwasher
switches off after a few minutes if you
do not press any sensor controls
during this time.
Touch the sensor control to switch
the dishwasher back on.
The OKsensor control is used to
confirm a message or setting and also
to move to the next menu or another
level.
Under Settings, a scroll bar will
appear on the right-hand side of the
display. This offers further options.
These options can be shown using the
sensor controls.
You can alter the dishwasher’s controls
to suit changing requirements in the
Settings menu (see “Settings” chapter).
The option that is selected will have a
tick next to it.
To exit a sub-menu again, use the
Backsensor control.
If you do not press any sensor controls
for several seconds, the display will
revert to the previous menu. You may
then have to enter your settings again.

Miele PFD 101 Specifications

General

Brand	Miele
Model	PFD 101
Category	Dishwasher
Language	English