Operation
49
LEDs on the keypad
Light-emitting diodes that indicate the status of the dishwasher are
integrated in the keypad.
Except for the Start/Stop button, which has a green LED during nor-
mal operation, all other LEDs light up yellow.
In the event of a fault the Start/Stop button flashes red.
Button LED Status
(On/Off)
button
ON The dishwasher is on.
OFF The dishwasher is off.
,
and
buttons
(program
shortcut
buttons)
ON The lit program has been selected. At
the end of the program, the LED will re-
main lit until a different program is se-
lected.
OFF The program is not selected, or program
settings are being configured.
button
(additional
programs)
ON A program was selected from the pro-
gram list. At the end of the program, the
LED will remain lit until a different pro-
gram is selected.
OFF No program has been selected from the
list, or program settings are being con-
figured.
Start/Stop
button
ON A program is running.
FLASHES
GREEN
A program has been selected, but has
not yet started.
FLASHES
RED
A fault has occurred.
OFF A program has finished.
button
(door but-
ton)
ON A program has been selected, but has
not yet started.
FLASHES A program has finished and the door is
closed.
OFF A program is running.
To Next Page
Loading...
Need help?
General
