Operation
55
Cancelling a program
Only cancel a program that has already started if it is absolutely nec-
essary, e.g. if you want to change the program.
In the event of a fault, the program will be cancelled automatically.
Caution! The wash load and the interior of the dishwasher may
be hot.
Danger of scalding and burning.
Press the Start/Stop button.
The following will appear in the display:
Select Yes and confirm your choice with theOKbutton.
The program is only cancelled when Yes is confirmed.
If confirmation does not occur within 20 seconds after the Start/
Stopbutton has been pressed, the display will revert to the pro-
gram cycle.
The following message appears in the display:
If you change the program and the detergent dispenser flap has al-
ready opened, add more detergent as needed.
To Next Page
Loading...
Need help?
General
