Miele PG 8061 - Advanced Functions and Settings; Additional Functions and Program Adjustments

Additional functions
58
Delay Start
You can schedule the start time of a program in advance. The start
time can be delayed by 1minute to 24hours.
The Delay Start function must be enabled in the Settings menu (see
"Settings, Delay Start").
If Delay Start is disabled, the function will not appear in the "Addi-
tional functions" screen.
When using the Delay Start function together with powder deter-
gent, make sure that the detergent dispenser is dry before adding
the detergent. Wipe dry with a cloth if necessary.
If the compartment is wet, detergent can clump up and stick to the
dispenser, which may prevent the detergent from being fully dis-
pensed.
Setting the
start time
 Turn the dishwasher on using the  button.
 Select the desired program (see "Operation, Selecting a program").
The LED for the Start/Stopbutton will flash.
 Press the OK button.
 Select Delay start and confirm your choice with theOKbutton.
Start time
-- : --
 Use the arrow buttons  (higher) and  (lower) to set the hours and
minutes, and confirm each entry with the OKbutton.
 After entering the start time, press the Start/Stopbutton.
Normal plus
Temperature
55 °C
12:30Turn on at
G
The selected program, along with the temperature and start time, will
then be displayed.
To cancel the entered Delay Start setting before the program starts,
turn the dishwasher off using the button.