Miele TDA 150 C User Manual

Operating the tumble dryer
14
Display h min
The display shows:
– The programme duration (h:min =
hours and minutes)
– Check and fault messages
– Programmable functions
These are used to alter the dryer's
electronics to suit different
requirements.
See "Programmable functions" for
more information.
Estimated time remaining
The estimated programme duration will
appear in the h:min display in hours and
minutes (estimated time remaining).
Exception: Timed drying programmes
which last for the duration stated in the
control panel.
The following factors can all affect the
estimated time remaining: residual
moisture content after spinning; type of
fabric; size of load; room temperature;
fluctuations in power supply. The
electronics continually assess
conditions in the appliance and adjust
the estimated time remaining with
increasing accuracy. Because of this,
the time displayed can alter during the
course of a programme.
Drum lighting
When the dryer is switched on at the
mains and the door is opened, the drum
lighting will come on. It will go out a few
minutes later to save energy.
Before using for the first time
 Before using the tumble dryer for
the first time, ensure that it is
correctly installed and connected.

Miele TDA 150 C Specifications

General

Door hinge	Left
Cord length	2 m
Control type	Rotary
Loading type	Front-load
Drying system	Condensation
Product color	White
Built-in display	Yes
Appliance placement	Freestanding
Cycle time	109 min
Noise level	63 dB
Drying class	A
Drum capacity	7 kg
Delayed start timer	-
Current	16 A
Heat source	Electric
AC input voltage	220-230 V
Energy consumption	4.14 kWh
Annual energy consumption	494 kWh

Weight and Dimensions

Depth	580 mm
Width	595 mm
Height	850 mm
Weight	47000 g
Depth with door open	1060 mm