Programmable functions
57
Clean out airways indicator
Fluff should be removed after drying.
The Clean out airways indicator will
remind you to clean the filters when a
certain amount of fluff has collected in
the filters. You can decide at what
level of fluff this reminder should be
given.
You will have an idea of how often this
should be done after a few drying
programmes.
Certain faults can also cause this
indicator light to come on at other
times.
Follow steps (,, ...) to
programme and store in memory.
Before you begin, ensure the
following:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is pointing
to Finish.
Press the Start button and keep it
pressed in whilst carrying out steps
-.
Switch the tumble dryer on.
Wait until the indicator light for the
Start button lights up constantly . . .
. . . and then release the Start button.
Turn the programme selector
toWoollens handcare.
The Empty the container indicator light
will indicate one long flash.
The option selected will be displayed
by a number which will alternate with
.
The Clean out airways indicator
light is deactivated
The Clean out airways indicator
light only appears when there is a
heavy build-up of fluff
(The Clean out airways indicator light
will also flash once)
Factory default setting
(The Clean out airways indicator light
will also flash twice)
The Clean out airways indicator
light appears when there is only a
small build-up of fluff
(The Clean out airways indicator light
will also flash three times)
Pressing the Start button switches
between the options.
Switch the tumble dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
Carry out steps -.
Switch the dryer off after checking
the indicator lights.
To Next Page
Need help?
General
Weight and Dimensions
