Programmable functions
51
Anti-crease
Helps prevent creasing, if laundry is
not normally removed immediately
after the end of a programme. The
drum rotates at intervals for 2 hours
after the end of a programme.
Anti-crease
– is activated ex-works. You can
shorten the duration of the Anti-
crease phase or deactivate it if
wished.
– can be used for all programmes,
except Woollens handcare.
– should always be switched on.
Follow steps (,, ...) to
programme and store in memory.
Before you begin, ensure the
following:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is pointing
to Finish.
Press the Start button and keep it
pressed in whilst carrying out steps
-.
Switch the tumble dryer on.
Wait until the indicator light for the
Start button lights up constantly . . .
. . . and then release the Start button.
Turn the programme selector to
Cottons Normal.
The Empty the container indicator light
will flash three times.
The option selected will be displayed
by a number which will alternate with
.
Anti-crease action off
Anti-crease 1 h
(The Clean out airways indicator light
will also flash once)
Anti-crease 2 h (factory default
setting)
(The Clean out airways indicator light
will also flash twice)
Pressing the Start button switches
between the options.
Switch the tumble dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
Carry out steps -.
Switch the dryer off after checking
the indicator lights.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
