Programmable functions
52
Switching the buzzer on/off
A buzzer sounds (at intervals for a
maximum of 1 hr) to let you know the
programme has finished.
The dryer is delivered with the buzzer
switched on, but you can switch it off if
you wish.
The buzzer will still sound if there is a
fault, even if it has been switched off.
Follow steps (,, ...) to
programme and store in memory.
Before you begin, ensure the
following:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is pointing
to Finish.
Press the Start button and keep it
pressed in whilst carrying out steps
-.
Switch the tumble dryer on.
Wait until the indicator light for the
Start button lights up constantly . . .
. . . and then release the Start button.
Turn the programme selector to
Cottons Low temperature.
The Empty the container indicator light
will flash four times.
The option selected will be displayed
by a number which will alternate with
.
Buzzer off
Buzzer on (factory default setting)
(The Clean out airways indicator light
will also flash once)
Pressing the Start button switches
between the options.
Switch the tumble dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
Carry out steps -.
Switch the dryer off after checking
the indicator lights.
To Next Page
Need help?
General
Weight and Dimensions
