Miele TDA 150 C User Manual

Programmable functions
50
Extending the drying level for
the "Minimum iron"
programme
The tumble dryer is designed to dry
effectively using as little energy as
possible. However, if you require the
laundry to be drier or damper, you can
reduce or increase the default residual
moisture in this programme.
Follow steps (,, ...) to
programme and store in memory.
Before you begin, ensure the
following:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is pointing
to Finish.
 Press the Start button and keep it
pressed in whilst carrying out steps
-.
 Switch the tumble dryer on.
 Wait until the indicator light for the
Start button lights up constantly . . .
 . . . and then release the Start button.
 Turn the programme selector to
Cottons Normal+.
The Empty the container indicator light
will flash twice.
The option selected will be displayed
by a number which will alternate with
.
 Laundry will be damper
 Factory default setting
(The Clean out airways indicator light
will also flash once)
 Laundry will be drier
(The Clean out airways indicator light
will also flash twice)
 Pressing the Start button switches
between the options.
 Switch the tumble dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
 Carry out steps -.
 Switch the dryer off after checking
the indicator lights.

Miele TDA 150 C Specifications

General

Door hinge	Left
Cord length	2 m
Control type	Rotary
Loading type	Front-load
Drying system	Condensation
Product color	White
Built-in display	Yes
Appliance placement	Freestanding
Cycle time	109 min
Noise level	63 dB
Drying class	A
Drum capacity	7 kg
Delayed start timer	-
Current	16 A
Heat source	Electric
AC input voltage	220-230 V
Energy consumption	4.14 kWh
Annual energy consumption	494 kWh

Weight and Dimensions

Depth	580 mm
Width	595 mm
Height	850 mm
Weight	47000 g
Depth with door open	1060 mm