Miele TDA 150 C User Manual

Installation and connection
43
 Guide the hose to the right or left side
of the dryer, as required.
Leave the hose in the middle holder to
prevent it from being kinked
inadvertently.
External drainage via a sink or gully
 See "Front view" illustration.
 If you want to drain the water off
into a sink or basin, you will need to
secure the hose carefully, e.g. by
tying it to a tap, to make sure it
cannot slip during use.
Otherwise there is a risk of
overflowing water which could cause
damage.
 Use the bow-shaped guide to prevent
the drain hose from becoming kinked.

Miele TDA 150 C Specifications

General

Door hinge	Left
Cord length	2 m
Control type	Rotary
Loading type	Front-load
Drying system	Condensation
Product color	White
Built-in display	Yes
Appliance placement	Freestanding
Cycle time	109 min
Noise level	63 dB
Drying class	A
Drum capacity	7 kg
Delayed start timer	-
Current	16 A
Heat source	Electric
AC input voltage	220-230 V
Energy consumption	4.14 kWh
Annual energy consumption	494 kWh

Weight and Dimensions

Depth	580 mm
Width	595 mm
Height	850 mm
Weight	47000 g
Depth with door open	1060 mm