Miele TDA 150 C User Manual

Problem solving guide
31
Problem Possible cause and remedy
The Start indicator light
flashes slowly and the
display is dark
The dryer is in standby. This is a normal function and
does not indicate a fault.
 See "Standby" in "Programmable functions".
The Clean out airways
indicator light comes on
at the end of a
programme
There is a build-up of fluff in the airways.
 Clean the fluff filters.
 Clean the condenser unit
 Open and close the door while the dryer is
switched on. The indicator light will go out.
The programme is
cancelled and the Clean
out airways indicator
light comes on
An excessive amount of fluff has built up.
 Clean the fluff filters and condenser unit.
 Open and close the door while the dryer is
switched on. The indicator light will go out.
Bars flash in the display
at the end of a
programme:
.........
The programme has finished but the laundry has not
yet cooled down.
 Either remove the laundry and spread it out to cool
down or leave it in the tumble dryer to cool down
during the cooling phase.
 lights up The programme selector has been moved.
 Select the original programme. The time remaining
will appear in the display again.

Miele TDA 150 C Specifications

General

Door hinge	Left
Cord length	2 m
Control type	Rotary
Loading type	Front-load
Drying system	Condensation
Product color	White
Built-in display	Yes
Appliance placement	Freestanding
Cycle time	109 min
Noise level	63 dB
Drying class	A
Drum capacity	7 kg
Delayed start timer	-
Current	16 A
Heat source	Electric
AC input voltage	220-230 V
Energy consumption	4.14 kWh
Annual energy consumption	494 kWh

Weight and Dimensions

Depth	580 mm
Width	595 mm
Height	850 mm
Weight	47000 g
Depth with door open	1060 mm