Miele TDA 150 C User Manual

Problem solving guide
34
Problem Possible cause and remedy
The drying process
goes on too long or
even switches off*
 The fluff filters must be dry.
The laundry is too damp.
 Spin using a higher spin speed in the washing
machine.
The tumble dryer has been overloaded.
 Do not exceed the maximum load for the
programme selected.
Metallic components, e.g. zippers have prevented the
dryer from registering the correct moisture level.
 Open the zippers next time.
 If the problem recurs, dry these items using the
Warm air timed drying programme.
* Before starting another programme:
 Switch the dryer off and then on again.

Miele TDA 150 C Specifications

General

Door hinge	Left
Cord length	2 m
Control type	Rotary
Loading type	Front-load
Drying system	Condensation
Product color	White
Built-in display	Yes
Appliance placement	Freestanding
Cycle time	109 min
Noise level	63 dB
Drying class	A
Drum capacity	7 kg
Delayed start timer	-
Current	16 A
Heat source	Electric
AC input voltage	220-230 V
Energy consumption	4.14 kWh
Annual energy consumption	494 kWh

Weight and Dimensions

Depth	580 mm
Width	595 mm
Height	850 mm
Weight	47000 g
Depth with door open	1060 mm