Settings
116
SmartGrid
The SmartGrid setting is only visible
when the WiFi module is fitted and
signed on.
This function can be used for starting
your washer-dryer automatically at a
time when your energy costs are most
economical.
Activating SmartGrid, gives the Delay
start button a new function.
Set SmartStart with the "Delay start"
button.
The washer-dryer will then start within
the timeframe that you have specified
when it receives a signal from your
energy supplier.
If it has not received a signal from your
energy supplier by the latest start time
set, the washer-dryer will start
automatically.
The SmartGrid function is switched off
by default.
SmartStart
If you have activated the SmartGrid
function in Settings, instead of Start in,
SmartStart will appear in the display
when you press the Delay start button.
You can define a period (from 15
minutes to 24 hours), in which the wash
programme must be started. The
procedure for setting this is the same as
for setting the time for Delay start.
To Next Page
Loading...
Need help?
General
